VEMD2523SLX01 www.vishay.com vishay semiconductors rev. 1.0, 05-apr-13 1 document number: 84164 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 silicon pin photodiode description VEMD2523SLX01 is a high speed and high sensitive pin photodiode in a miniature si de looking, surface mount package (smd) with dome lens. the clear epoxy allows light detection of a wide wavelength range from 350 nm to 1120 nm. the photo sensitive area of the chip is 0.23 mm 2 . features ? package type: surface mount ? package form: side view ? dimensions (l x w x h in mm): 2.3 x 2.55 x 2.3 ? aec-q101 qualified ? high radiant sensitivity ? suitable for visible and near infrared radiation ? fast response times ? angle of half sensitivity: ? = 35 ? package matched with ir emitter series vsmb2943slx01 ? floor life: 4 weeks, msl 2a, acc. j-std-020 ? lead (pb)-free re flow soldering ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? high speed photo detector ?light curtain ? detector for optical switch note ? test conditions see table basic characteristics note ? moq: minimum order quantity product summary component i ra (a) ? (deg) ? 0.1 (nm) VEMD2523SLX01 10 35 350 to 1120 ordering information ordering code packaging remarks package form VEMD2523SLX01 tape and reel moq: 3000 pcs, 3000 pcs/reel side view absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 60 v power dissi pation t amb ?? 25 c p v 215 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c soldering temperature acc. reflow solder profile fig. 7 t sd 260 c thermal resistance juncti on/ambient acc. j-std-051 r thja 250 k/w
VEMD2523SLX01 www.vishay.com vishay semiconductors rev. 1.0, 05-apr-13 2 document number: 84164 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - reverse dark current vs. ambient temperature fig. 2 - relative reverse light current vs. ambient temperature fig. 3 - reverse light current vs. irradiance fig. 4 - diode capacitance vs. reverse voltage basic characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 50 ma v f 1v breakdown voltage i r = 100 a, e = 0 v (br) 32 v reverse dark current v r = 10 v, e = 0 i ro 110na diode capacitance v r = 0 v, f = 1 mhz, e = 0 c d 4pf v r = 5 v, f = 1 mhz, e = 0 c d 1.3 pf open circuit voltage e e = 1 mw/cm 2 , ? = 950 nm v o 350 mv temperature coefficient of v o e e = 1 mw/cm 2 , ? = 950 nm tk vo - 2.6 mv/k short circuit current e e = 1 mw/cm 2 , ? = 950 nm i k 10 a temperature coefficient of i k e e = 1 mw/cm 2 , ? = 950 nm tk ik 0.1 %/k reverse light current e e = 1 mw/cm 2 , ? = 950 nm, v r = 5 v i ra 71014a angle of half sensitivity ? 35 deg wavelength of peak sensitivity ? p 900 nm range of spectral bandwidth ? 0.1 350 to 1120 nm rise time v r = 10 v, r l = 1 k ? , ? = 820 nm t r 100 ns fall time v r = 10 v, r l = 1 k ? , ? = 820 nm t f 100 ns 20 1 10 100 1000 i ro - reverse dark current (na) t amb - ambient temperature (c) 94 8427 v r = 10 v 100 80 60 40 0.6 0.8 1.0 1.2 1.4 i ra, rel - relative reverse light current t amb - ambient temperature (c) 94 8416 v r = 5 v = 950 nm 0 100 80 60 40 20 0.1 1 10 100 0.01 i ra - reverse light current (a) e e - irradiance (mw/cm 2 ) v r = 5 v 10 1 0.1 0 2 4 6 8 0.1 c d - diode capacitance (pf) v r - reverse voltage (v) 94 8430 e = 0 f = 1 mhz 100 10 1
VEMD2523SLX01 www.vishay.com vishay semiconductors rev. 1.0, 05-apr-13 3 document number: 84164 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - relative spectral sensitivity vs. wavelength fig. 6 - relative radiant intensity vs. angular displacement reflow solder profile fig. 7 - lead (pb)-free reflow solder profil e acc. j-std-020d drypack devices are packed in moistu re barrier bags (mbb) to prevent the products from mo isture absorption during transportation and storage. each bag contains a desiccant. floor life floor life (time between soldering and removing from mbb) must not exceed the time indicated on mbb label: ? floor life: 4 weeks ? conditions: t amb < 30 c, rh < 60 % ? moisture sensitivity level 2a, acc. to j-std-020. drying in case of moisture absorpt ion devices should be baked before soldering. conditions see j-std-020 or label. devices taped on reel dry us ing recommended conditions 192 h at 40 c (+ 5 c), rh < 5 %. 0 0.2 0.4 0.6 0.8 1.0 1.2 400 500 600 700 800 900 1000 1100 21553 - wavelength (nm) s ( ) rel - relative spectral sensitivity 0.4 0.2 0 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 s rel - relative radiant sensitivity ? - angular displacement 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19841 255 c
VEMD2523SLX01 www.vishay.com vishay semiconductors rev. 1.0, 05-apr-13 4 document number: 84164 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: vemd2523sl
VEMD2523SLX01 www.vishay.com vishay semiconductors rev. 1.0, 05-apr-13 5 document number: 84164 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping and reel dimensions in millimeters: vemd2523sl drawing-no.: 9.800-5123.01-4 i ss ue: 2; 19.02.13 s pecification s according to din technical drawing s drawing refer s to following type s : reel dimen s ion s and tape leader and tailer tape: part s mounted empty (400 mm min.) empty (160 mm min.) direction of pulling out unreel direction ? 62 0.5 ? 330 1 reel 2 . 5 0 . 5 label po s ted here coming out from reel tape po s ition ? 1 3 0 . 5 12.4 1.5 3000 pc s / reel lead i lead ii cathode anode collector emitter anode cathode device v s mb2943 s lx01 v s mf2893 s lx01 v s mb2948 s l vemd2023 s lx01 vemt2023 s lx01 vemt2523 s lx01 v s my2853 s l s ee table terminal po s ition in tape vemd2523 s lx01 x 2:1 12 +0.3 -0.1 ii i 1.75 0.1 5.5 0.05 2 0.05 40.1 ?1.55 0.05 8 0.1 2.85 0.1
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
